![]() As with any other tool, remember to use caution, and follow proper safety protocols to ensure your safety and that of others around you. ![]() Once the bit is securely in place, you can turn on the hammer and start drilling. Make sure to turn it off after use and that all parts are securely fastened before putting it away. This will allow for a smoother transition when turning the jackhammer on. Once your bit is seated correctly and the chuck is hand-tight, use a few drops of oil to lubricate the outside of the chuck. You don’t want your bit to become stuck in the chuck. Use the ratchet or adjustable wrench to hand-tighten the chuck to the bit, but do not tighten it too much. With your bit in hand, sit the head of the bit into the chuck of the jackhammer. Once your bit is in good condition, you can move on to the actual putting in process. If it is too small, it will not have enough power to do the job correctly. If it is too big, it will not fit in the chuck of the jackhammer. Once you have all of your supplies, you should start by inspecting your bit to make sure that it is in good condition and is the right size for the hammer. If you are using a demolition hammer, you will also need a hammer chisel. First, you must gather the correct sized bit for your jackhammer, a ratchet or adjustable wrench, and an oil can. Putting a bit into a jackhammer is a simple process that requires a few basic tools. Once the bit has been removed, you can then insert a new bit.įor safety, make sure that the bit is firmly seated in the holding mechanism and all locks are secure before using the hammer. ![]() You may need to use a screwdriver or similar tool to pry the bit out if it is stuck. ![]() Lampe Berger Diffuser Review & Tutorial - Purifying The AirĬarefully push the bit up and to the right away from you until it unlocks and can be removed. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |